(12 Pack) 110 Degree 9mm 1/2 Overlay Clip-On Hinge

110 Degree 9mm 1/2 Overlay, 35mm Cup Diameter, Clip-On Hinge For Frameless Installation
Use typically for two doors meeting in middle of a separator panel (cabinet wall)

• For cabinets without face frames
  
• For 3/4" doors and 3/4" thick side panels
  
• Adjustment for vertical, horizontal and depth when mounted
  
• Order #6 wood screws separately for mounting -No screws included
  
• Finish: Bright Nickel
  

Half overlay hinges overlay less than half of the panel they are attached to so that a gap of about 3mm is left between doors meeting "back-to-back".
An overlay of 8mm by each door will result in this 3mm gap if the cup bore distance from the edge of the door is 4mm.

ORDER MOUNTING PLATES SEPARATELY: CHOOSE FOR YOUR APPLICATION HR-400-0R22-05 0MM Cam Adjustable , HR-400-1234-05 3MM plate or 0MM Standard Duty