(5 Pack) 110 Degree 9mm 1/2 Overlay Clip-On Hinge HR-500-0536-05

110 Degree 9mm 1/2 Overlay, 35mm Cup Diameter, Clip-On Hinge For Frameless Installation
Use typically for two doors meeting in middle of a separator panel (cabinet wall)

• For cabinets without face frames
  
• For 3/4 inch doors and 3/4 inch thick side panels
  
• Adjustment for vertical, horizontal and depth when mounted
  
• Order #6 wood screws separately for mounting -No screws included
  
• Finish: Bright Nickel
  

Half overlay hinges overlay less than half of the panel they are attached to so that a gap of about 3mm is left between doors meeting inchback-to-back inch.
An overlay of 8mm by each door will result in this 3mm gap if the cup bore distance from the edge of the door is 4mm.

ORDER MOUNTING PLATES SEPARATELY: CHOOSE FOR YOUR APPLICATION HR-400-0R22-05 0MM Cam Adjustable , HR-400-1234-05 3MM plate or 0MM Standard Duty