Coat Hook Ceramic Ends Two Prong Antique Brass - Back Mount

Die Cast Hook - Hook Antique Brass Plating with two white ceramic knob. This hook would be appropriate for a wide range of Coat Rack styles and wall hangings.

• Centers: 1" (25.4 mm)
  
• Total Dimensions: 5 1/2" x 3 3/4" (140 mm x 96 mm)
  
• Base Dimensions: 1 5/8" x 1 1/16" (41 mm x 27 mm)
  
• Hook Width: 3/8" (10 mm)
  
• Mounted: Back
  
• Finish: Antique Brass
  

This hook mounts from the back with threaded screw holes on the backside of the hook. If mounted on a board the screws would go through the backside of the board. You can not directly mount to a wall. If used on a door the screw heads would show on the other side of the door. Could be used on a closet door where the screw heads showing would not make a difference. Uses an 8-32 screw - use material thickness for length as threaded section of 1/4" extends from back of base. If your wood is 3/4" you will need 3/4" screw. Comes with 1" screws. Purchase other lengths of screws separately.